Composite Gates Buckinghamshire

We survey, manufacture and fit composite and metal gates across Buckinghamshire and the Chilterns — High Wycombe, Amersham, Beaconsfield and Marlow, north to Aylesbury and Milton Keynes, and west into Oxfordshire. Every gate is measured on site, made to those measurements, and installed by the same people who quoted it.

Coverage moves. We are always reviewing how the installers on our network are performing and taking on new ones as demand grows, so the towns below are where we work most consistently rather than a complete or permanent list.

Towns and cities we cover

The surrounding villages and suburbs of each are covered too. If your town is not named, send your postcode and we will confirm.

The Chilterns & south Buckinghamshire

• High Wycombe
• Amersham
• Beaconsfield
• Marlow
• Slough

Also covered: Chesham, Gerrards Cross, Chalfont St Giles, Great Missenden, Princes Risborough and the Chilterns villages.

North Buckinghamshire

• Aylesbury
• Milton Keynes

Also covered: Buckingham, Winslow, Wendover, Newport Pagnell, Olney and the surrounding villages.

Into Oxfordshire

• Oxford
• Bicester
• Henley-on-Thames

Also covered: Thame, Wallingford, Watlington and the villages along the county line.

What we make and fit

• Composite driveway gates Double and single leaf, hung or sliding, manual or automated.
• Composite garden gates Side gates, back gates and matching pedestrian gates.
• Metal gates Steel and metal-framed gates, made to measure.
• Electric gates Automation on new gates, or retro-fitted to existing ones.
• Composite fencing Matching fence panels and screens to tie the boundary together.

What Buckinghamshire asks of a gate

Gravel drives and how a gate crosses them

A great many Chilterns properties have a gravel approach, and gravel and gates need thinking about together. A swing gate has to clear a surface that moves and builds up under the leaf, which is why a well-hung gate here sits with a deliberate ground clearance rather than skimming the drive. For a sliding gate the track needs a firm, level run — laying it across loose gravel without a proper base is the commonest way to end up with a gate that jams. Both are easy to get right at survey and awkward to fix afterwards.

The Chilterns National Landscape

A substantial part of the county sits within the Chilterns National Landscape, and the villages inside it carry planning considerations that Milton Keynes does not. Height, style and how a gate sits in the wider setting can all be looked at, and a good number of properties are listed or in conservation areas as well. It rarely stops a gate; it does shape one. Your local planning authority is the one to ask, and asking before ordering is far cheaper than asking after.

Larger plots, longer drives, and automation as the norm

Set back houses on long drives are common here, and once a gate is more than a few steps from the door it stops being something anyone opens by hand twice a day. Automation with an intercom is closer to standard than optional on these properties. The practical question is usually power: if there is no supply at the opening, ducting has to reach it, which is groundworks as much as electrics and much cheaper done alongside other work.

Flint, brick and matching an older boundary

Chilterns walls and piers often mix flint with brick, and both the colour choice and the fixing need care. Flint work can be beautiful and structurally awkward at the same time — a pier that looks solid may not take the load of a tall, fully boarded leaf without work first. We check the piers at survey and say plainly if they need making good, rather than hanging a heavy gate on optimism.

What affects the cost

Gate prices move on a handful of variables rather than a fixed rate. The main ones are:

FAQs about Composite Gates in Buckinghamshire

Do you cover my village if it is not listed above?

Very likely. The towns listed are where we work most often across Buckinghamshire and over the line into Oxfordshire, and the Chilterns villages around each are covered as a matter of course. Send your postcode and you will get a straight answer either way rather than a maybe.

Can gates work on a gravel driveway?

Yes, with the right detail. A swing gate is hung with a deliberate ground clearance so it clears gravel that shifts and builds up under the leaf. A sliding gate needs a firm, level base for its track — laid straight onto loose gravel it will jam sooner or later. Both are simple decisions at survey and awkward corrections afterwards.

Does the Chilterns National Landscape affect what I can have?

It can. Villages inside it carry planning considerations that do not apply elsewhere in the county, and the authority takes a view on how new work sits in its setting. Many properties are also listed or in conservation areas. A gate is usually fine; the details get more scrutiny. Check with your planning department before ordering.

There is no power at the gate — can it still be automated?

Usually, but it becomes a groundworks question as much as an electrical one, because a duct has to reach the opening. On a long drive that is a real part of the cost, and it is far cheaper done alongside other work than retro-fitted. If automation is even a possibility later, say so at survey and the gate can be built ready for it.

Can you hang gates from existing flint or brick piers?

Often, and it usually looks better than new posts. Flint work in particular can look solid while not being able to take the load of a tall, fully boarded leaf. We assess the piers at survey and tell you honestly whether they need making good first, rather than hanging a heavy gate and hoping.

← Back to all areas we cover