Composite Gates Warwickshire
We survey, manufacture and fit composite and metal gates across Warwickshire — Stratford-upon-Avon, Nuneaton and the market towns between, out towards Rugby and the Coventry fringe. Every gate is measured on site, made to those measurements, and installed by the same people who quoted it.
Coverage moves. We are always reviewing how the installers on our network are performing and taking on new ones as demand grows, so the towns below are where we work most consistently rather than a complete or permanent list.
Towns and cities we cover
The surrounding villages and suburbs of each are covered too. If your town is not named, send your postcode and we will confirm.
Warwickshire
Also covered: Warwick, Royal Leamington Spa, Kenilworth, Rugby, Bedworth, Atherstone, Alcester, Shipston-on-Stour, Southam and the surrounding villages.
What we make and fit
- Composite driveway gates Double and single leaf, hung or sliding, manual or automated.
- Composite garden gates Side gates, back gates and matching pedestrian gates.
- Metal gates Steel and metal-framed gates, made to measure.
- Electric gates Automation on new gates, or retro-fitted to existing ones.
- Composite fencing Matching fence panels and screens to tie the boundary together.
What Warwickshire asks of a gate
Historic frontages, and a lot of them
Stratford-upon-Avon, Warwick, Kenilworth and Royal Leamington Spa carry some of the most tightly protected frontages in the Midlands — conservation areas, listed buildings and, in the older centres, timber framing and Regency stucco that a modern gate has to sit alongside without shouting. Height, style and material all get looked at more closely here than they would on a modern estate, and consent is sometimes needed. It shapes the design rather than preventing it.
Choosing a colour that works with the brick
Warwickshire brick runs warm — reds and oranges through the older stock, softer buff in places — and a colour that looks smart against grey London stock can read as harsh against it. Greys and the warmer browns generally settle better than black on a Warwickshire frontage, particularly next to timber framing. It is worth looking at samples against your own wall in daylight rather than choosing from a screen.
Commuter properties on the Coventry and Birmingham fringe
Much of the north of the county commutes, and a gate on a house that is empty from eight until six is doing a different job from one on a house with somebody in it. That pushes towards automation, because a gate opened by hand twice a day tends to get left open, and towards a sensible answer for deliveries so a courier does not become the reason it is propped ajar. Both are cheaper decided at survey than added later.
Village plots and the open country between
Between the towns Warwickshire is properly rural, with village plots, long approaches and open ground that catches more wind than the town frontages do. On an exposed opening a tall, fully boarded pair takes the full force of it, and the answer is a partly open infill or a lower top rail with heavier posts set deeper. The same county genuinely asks for two different gates depending on which end of it you are at.
What affects the cost
Gate prices move on a handful of variables rather than a fixed rate. The main ones are:
Width of the opening — the single biggest factor, and what decides whether a single leaf, a pair or a sliding gate is appropriate.
Height and infill — a taller, fully boarded gate uses more material and puts more load on the frame and posts.
Frame and material — composite board on a metal frame, metal only, or composite with a decorative top.
Automation and access control — intercoms and delivery access are worth deciding up front rather than retro-fitting.
Design constraints — conservation areas and listed frontages can shape height, style and material.
Existing walls and piers — whether they can carry the gate as they stand, or need work first.
FAQs about Composite Gates in Warwickshire
Do you cover my town if it is not listed above?
Very likely. Warwickshire is covered as a whole — Warwick, Royal Leamington Spa, Kenilworth, Rugby and the villages between are all within reach even where they do not yet have a page of their own. Send your postcode and you will get a straight answer either way rather than a maybe.
I am in a Stratford or Warwick conservation area — is a gate possible?
Usually yes, but height, style and material may all be constrained and consent is sometimes needed, particularly on a listed property or alongside timber framing. It shapes the design rather than ruling it out. Your district council is the authority — raise it when you enquire and check with them before ordering.
Which colours suit Warwickshire brick?
Greys and the warmer browns generally settle better than black against warm red and buff brick, and they sit more comfortably next to timber framing in the older centres. There is no single right answer because the brick varies across the county. Look at samples against your own wall in daylight before you decide.
Is automation worth it on a commuter property?
On a house that is empty all day it is usually the difference between a gate that stays shut and one that gets left open, which is the whole point of having it. On a gate you pass twice a day and are home to manage, it is genuinely optional. We will say which we think applies rather than quoting automation as standard.
What changes on an exposed village plot?
The infill and the posts. Open ground between the towns catches considerably more wind than a sheltered town frontage, and a tall solid pair takes all of it. A partly open infill or a lower top rail lets wind through, and heavier posts set deeper carry the rest. It is decided at survey once we have seen the opening.
Not sure you are in range? Send us your postcode and we will confirm whether we can cover you — either way, you will get a straight answer.
Get a free quote← Back to all areas we cover
