Made to measure · Supplied and fitted

Composite Gates King's Lynn

Composite driveway gates, garden gates and side gates for homes in King's Lynn, made to measure on a steel frame and fitted by the experienced local fabricator who covers the area. Covering Gaywood, South Wootton, North Wootton, West Lynn, Terrington St Clement, Dersingham and Hunstanton.

Photos first, then a price. Send a few photos and the width of your opening, and you will have a provisional price before anyone travels out.

Black woodgrain composite driveway gates with an arched top and black steel frame
Driveway gates

Composite driveway gates

A few of the driveway gates fitted lately by fabricators on our network: a dark pair with a screen top, a pair with fleur-de-lis finials, an arched grey pair, and four leaves each held by a drop bolt.

Chocolate composite driveway gates with a decorative screen along the top, fitted between brick walls
Chocolate pair with a screen top
Dark composite driveway gates with fleur-de-lis finials and a drop bolt
Pair with fleur-de-lis finials
Grey composite driveway gates with an arched top and black frame
Arched grey pair
Four-leaf dark grey composite driveway gates with a drop bolt on each leaf, seen from a block-paved drive
Four leaves, each with a drop bolt

Seen something close to what you want? Send photos of your opening for a provisional price.

Garden and side gates

Side gates and garden gates

A light oak side gate, a side gate with a screen top, an arched gate set into a brick archway, and a gate with a fixed panel closing a wide gap.

Light oak composite side gate in a black frame beside a timber fence
Light oak side gate
Dark composite side gate with a decorative screen top and black frame
Side gate with a decorative screen top
Grey composite side gate with an arched top, set into a brick archway
Arched side gate in a brick archway
Grey composite gate with a matching fixed panel, black frame, beside a brick wall
Gate and fixed panel across a wide gap

Want a side gate to match your driveway gates? Mention it when you send your photos.

Guide prices

Side and garden gates

£900 to £1,500

A single gate, fabricated and fitted. The boards, the top and the lock decide where it falls.

Driveway gates

£1,800 to £5,000+

Fabricated and fitted. The width, the number of leaves and the finish decide where it falls.

Width of the opening — the biggest single factor, and what decides between a single gate, a pair and a sliding gate.

Fen wind — stiff frames and drop bolts for open, flat ground.

The old town — gates that suit King Street and the Tuesday Market Place streets.

Bungalows — lower, wider gates for the villages north of the town.

Guide prices only. Your provisional price is worked out from your photos and measurements.

Photos first, then a price

  • 1 Send photos and a width

    A few photos of the opening from the street and from inside, and its rough width.

  • 2 Get a provisional price

    A local fabricator looks at your photos and comes back with a provisional price and any questions.

  • 3 Measured on site

    If you are happy with the price, the fabricator visits to measure accurately and confirm the details.

  • 4 Made and fitted

    Your gate is made to those measurements on a steel frame and fitted by the same fabricator.

What King's Lynn asks of a gate

Wind across the fens and the Wash

Out towards Terrington St Clement, Clenchwarton and West Lynn the land is flat and open, and the wind comes in off the Wash with nothing to slow it. A tall solid gate catches it like a sail. Frames here are built a size up, with drop bolts on both leaves and a stop at the centre, so the gates hold shut in a gale and do not rattle on their hinges through the night.

The old port town

King Street, Queen Street and the streets around the Tuesday Market Place are among the best-kept Georgian and medieval streets in the region, and they sit in conservation areas. The Borough Council of King's Lynn and West Norfolk has more say over the fronts of houses there. A plain gate in a dark colour, at the height of the wall either side, is the usual answer, and it is worth asking the council before ordering.

Bungalows in the villages

South Wootton, North Wootton, Dersingham and the villages up the coast towards Heacham have plenty of bungalows with wide, low fronts. A tall pair can look out of scale there. A lower pair, or gates with a screen top above a shorter run of boards, keeps the view of the house while still closing off the drive for children and dogs.

Boards and frame colours

Composite boards

Board ranges vary from one fabricator to another, but they can fit almost any make. If you have seen a board you like, send the name or a photo and the fabricator will tell you whether it can be used.

Steel frames

Frames can be powder coated in almost any RAL colour. Black and dark grey are the usual choices, and a frame can be matched to your windows.

Areas we cover around King's Lynn

King's Lynn and the towns and villages around it are covered. If your area is not named, send your postcode and we will confirm.

Nearby towns

Also covered: Gaywood, Fairstead, South Wootton, North Wootton, West Lynn, Clenchwarton, Terrington St Clement, Watlington, Downham Market, Dersingham, Snettisham, Heacham and Hunstanton.

Nearby areas are on our Cambridgeshire page.

What we make and fit

FAQs about Composite Gates in King's Lynn

How much do composite gates cost in King's Lynn?

As a guide, a single side or garden gate is around £900 to £1,500 fabricated and fitted, and a pair of driveway gates runs from around £1,800 to £5,000 or more. The width, the number of leaves and the board colour all move it. Send photos and a width for a provisional price for your opening.

We are out on the fens. Will tall gates stand up to the wind?

Yes, if they are built for it: a heavier frame, drop bolts on both leaves and a centre stop.

I live on King Street. Are there rules about gates?

The old town is a conservation area. Check with the Borough Council of King's Lynn and West Norfolk before ordering.

Our bungalow has a wide, low front. What height of gate suits it?

Often a lower pair, or a screen top over shorter boards, so the gates do not hide the house.

Why do you ask for photos before visiting?

The fabricators on our network cover a wide area, so a visit can mean a long round trip. Photos and a rough width let them give you a provisional price first, and the visit to measure only happens once you are happy with it. You are not waiting in for someone only to find the price does not suit.

Do you cover Downham Market, Dersingham and Hunstanton?

Yes, along with Gaywood, the Woottons, Terrington St Clement, Heacham and the villages around them. If you are not sure about your street, send your postcode and we will confirm.

Ready for a price? Send a few photos and the width of your opening, and a local fabricator will come back to you with a provisional price.

Send your photos

← Back to Composite Gates Cambridgeshire