Composite Gates Stafford
Composite driveway gates, garden gates and side gates for homes in Stafford, made to measure on a steel frame and fitted by the experienced local fabricator who covers the area. Covering Wildwood, Baswich, Weeping Cross, Stone, Eccleshall, Penkridge and Great Haywood.
Photos first, then a price. Send a few photos and the width of your opening, and you will have a provisional price before anyone travels out.
Composite driveway gates
Driveway gates our fabricators have fitted lately: a pair with fleur-de-lis finials, an arched grey pair, a low sliding gate, and four leaves that fold back in pairs.
Seen something close to what you want? Send photos of your opening for a provisional price.
Side gates and garden gates
A light oak side gate, an arched gate with a built-in letterbox, a gate with a decorative screen top, and an arched gate in a brick archway.
Want a side gate to match your driveway gates? Mention it when you send your photos.
Guide prices
Side and garden gates
£900 to £1,500A single gate, fabricated and fitted. The boards, the top and a letterbox decide where it falls.
Driveway gates
£1,800 to £5,000+Fabricated and fitted. The width, hinged or folding, and the finish decide where it falls.
Width of the opening — the biggest single factor, and what decides between a single gate, a pair and a sliding gate.
Newer estates — gates that work with the open fronts of Wildwood and Burleyfields.
Country drives — wider pairs for the villages towards Cannock Chase.
Folding gates — four leaves for drives with little room to swing.
Guide prices only. Your provisional price is worked out from your photos and measurements.
Photos first, then a price
- 1
Send photos and a width
A few photos of the opening from the street and from inside, and its rough width.
- 2
Get a provisional price
A local fabricator looks at your photos and comes back with a provisional price and any questions.
- 3
Measured on site
If you are happy with the price, the fabricator visits to measure accurately and confirm the details.
- 4
Made and fitted
Your gate is made to those measurements on a steel frame and fitted by the same fabricator.
What Stafford asks of a gate
Open fronts on the newer estates
Wildwood, Baswich, Burleyfields and the newer roads on the edge of town were built with open front gardens, and some deeds still limit what can go across the front. A side gate down the passage is almost always fine. For the drive, check the deeds first, then a lower pair set back in line with the house often keeps everyone happy.
Drives in the villages
Towards Cannock Chase, villages such as Milford, Brocton and Great Haywood have bigger plots and drives that come straight off a country lane. Setting the gates back gives room to pull in clear of the road before they open, and a wide pair is built with a heavier frame and drop bolts so the leaves stay level over the years.
When a pair has no room to swing
Plenty of homes in Stafford have a drive only just long enough for the car, so a pair swinging inwards would hit it. Bi-folding gates fold back in two halves on each side and need about half the room. A sliding gate needs none at all in front, but does need a clear run along the wall or fence beside the opening.
Boards and frame colours
Composite boards
Board ranges vary from one fabricator to another, but they can fit almost any make. If you have seen a board you like, send the name or a photo and the fabricator will tell you whether it can be used.
Steel frames
Frames can be powder coated in almost any RAL colour. Anthracite and black are the usual choices, and a frame can be matched to your door.
Areas we cover around Stafford
Stafford and the towns and villages around it are covered. If your area is not named, send your postcode and we will confirm.
Nearby towns
Also covered: Wildwood, Baswich, Weeping Cross, Highfields, Rowley Park, Holmcroft, Burleyfields, Stone, Eccleshall, Gnosall, Penkridge, Milford, Brocton, Great Haywood and Hixon.
The rest of the county is on our Staffordshire page.
What we make and fit
- Composite driveway gates Hinged pairs, single leaves and sliding gates, built ready for a motor if you want one.
- Composite garden gates Side gates, back gates and pedestrian gates to match your driveway gates.
- Metal gates Steel and metal-framed gates, made to measure.
- Composite fencing Matching fence panels fitted alongside a new gate.
FAQs about Composite Gates in Stafford
How much do composite gates cost in Stafford?
As a guide, a single side or garden gate is around £900 to £1,500 fabricated and fitted, and a pair of driveway gates runs from around £1,800 to £5,000 or more. The width, hinged or folding, and the frame colour all move it. Send photos and a width for a provisional price for your opening.
We live on Wildwood. Can we have gates across the drive?
Check your deeds first, as some estates were built open-plan. A side gate is usually fine either way.
Our drive is short. What are the options?
Bi-folding gates need about half the swing of a pair, and a sliding gate needs none in front.
Can gates be set back from the lane?
Yes, so you can pull in clear of the road while they open.
Why do you ask for photos before visiting?
The fabricators on our network cover a wide area, so a visit can mean a long round trip. Photos and a rough width let them give you a provisional price first, and the visit to measure only happens once you are happy with it. You are not waiting in for someone only to find the price does not suit.
Do you cover Stone, Eccleshall and Penkridge?
Yes, along with Wildwood, Baswich, Great Haywood, Gnosall and the villages around them. If you are not sure about your street, send your postcode and we will confirm.
Ready for a price? Send a few photos and the width of your opening, and a local fabricator will come back to you with a provisional price.
Send your photos← Back to Composite Gates Staffordshire