Composite Gates Brampton
Composite driveway gates, garden gates and side gates for homes in Brampton, from the town to Talkin, Hallbankgate, Castle Carrock, Irthington and Gilsland, made to measure on a steel frame and fitted by a fabricator from our network.
Photos first, then a price. Send a few photos and the width of your opening, and you will have a provisional price before anyone travels out.
Composite driveway gates
Recent driveway gates from the fabricators on our network: a low sliding gate, a timber-effect pair with horizontal boards, a double gate with fencing to match, and a light grey pair with scroll work.
Seen something close to what you want? Send photos of your opening for a provisional price.
Side gates and garden gates
An arched gate with a built-in letterbox, horizontal boards with fencing to match, a side gate seen from the garden, and a pedestrian gate to match a driveway pair.
Want a side gate to match your driveway gates? Mention it when you send your photos.
Guide prices
Side and garden gates
£900 to £1,500A single gate, fabricated and fitted. The boards, the lock and a matching pedestrian gate decide where it falls.
Driveway gates
£1,800 to £5,000+Fabricated and fitted. The width, hinged or sliding, and the finish decide where it falls.
Width of the opening — the biggest single factor, and what decides between a single gate, a pair and a sliding gate.
Market town — gates that suit the Moot Hall streets and the conservation area.
Wall country — stone walls, farm lanes and wide rural entrances.
North Pennine weather — cold winters, so hardware that will not seize.
Guide prices only. Your provisional price is worked out from your photos and measurements.
Photos first, then a price
- 1
Send photos and a width
A few photos of the opening from the street and from inside, and its rough width.
- 2
Get a provisional price
A fabricator on our network looks at your photos and comes back with a provisional price and any questions.
- 3
Measured on site
If you are happy with the price, the fabricator visits to measure accurately and confirm the details.
- 4
Made and fitted
Your gate is made to those measurements on a steel frame and fitted by the same fabricator.
What Brampton asks of a gate
Around the Moot Hall
Brampton's centre, around the octagonal Moot Hall and Front Street, is built of red sandstone and sits in a conservation area. A gate on one of those fronts should look as if it belongs: usually a plain design in black or a dark colour, at the height of the walls either side. Cumberland Council handles planning, so if your house is in the centre it is worth checking before you order.
Hadrian's Wall country
East of the town, Lanercost, Banks and Gilsland sit along the line of Hadrian's Wall, among farms and stone-walled lanes. Country homes there often have wide entrances and long drives, and a pair is usually set back so you can pull in off the lane. A matching pedestrian gate saves opening the drive gates every time, and a low bottom rail keeps dogs in and lambs out.
Winters under the fells
Talkin, Castle Carrock and Hallbankgate sit under the North Pennine fells, and winters there bring hard frost, snow and a cold wind. Cheap hinges and latches seize, and timber gates swell and stick. A galvanised frame, coated hardware and posts set below the frost line keep a composite gate swinging freely, and the boards do not take up water.
Boards and frame colours
Composite boards
Board ranges vary from one fabricator to another, but they can fit almost any make. If you have seen a board you like, send the name or a photo and the fabricator will tell you whether it can be used.
Steel frames
Frames can be powder coated in almost any RAL colour. Black and dark brown suit the sandstone town, and anthracite sits well with newer homes.
Areas around Brampton
Send your postcode with your photos and we will confirm which fabricator can fit at your address.
Nearby towns
Also nearby: Milton, Talkin, Hallbankgate, Castle Carrock, Cumrew, Hayton, How Mill, Irthington, Walton, Lanercost, Banks and Gilsland.
The rest of the region is on our North West page.
What we make and fit
- Composite driveway gates Hinged pairs, single leaves and sliding gates, built ready for a motor if you want one.
- Composite garden gates Side gates, back gates and pedestrian gates to match your driveway gates.
- Metal gates Steel and metal-framed gates, made to measure.
- Composite fencing Matching fence panels fitted alongside a new gate.
FAQs about Composite Gates in Brampton
How much do composite gates cost in Brampton?
As a guide, a single side or garden gate is around £900 to £1,500 fabricated and fitted, and a pair of driveway gates runs from around £1,800 to £5,000 or more. The width, a pedestrian gate, the boards and the finish all move it. Send photos and a width for a provisional price for your opening.
Is there anything to check in the town centre?
Yes, whether your street is in the conservation area. If it is, ask Cumberland Council first; a plain, dark gate usually suits.
Can we have a pedestrian gate to match our driveway gates?
Yes. It can be made with the same boards and frame colour so the two read as a set.
Will the hinges cope with a hard winter?
Yes. Hinges and latch are coated, the frame is galvanised, and the posts are set deep so frost does not lift them.
Why do you ask for photos before visiting?
The fabricators on our network cover a wide area, so a visit can mean a long round trip. Photos and a rough width let them give you a provisional price first, and the visit to measure only happens once you are happy with it. You are not waiting in for someone only to find the price does not suit.
Do you cover Talkin, Castle Carrock and Gilsland?
Send your postcode with your photos and we will confirm which fabricator can take on your job, whether you are in Brampton, Talkin, Castle Carrock, Gilsland or the villages around.
Ready for a price? Send a few photos and the width of your opening, and you will hear back with a provisional price.
Send your photos← Back to Composite Gates North West