Composite Gates Workington
Composite driveway gates, garden gates and side gates for homes in Workington, from Seaton and Stainburn to Harrington, Salterbeck, Distington and Great Clifton, made to measure on a steel frame and fitted by a fabricator from our network.
Photos first, then a price. Send a few photos and the width of your opening, and you will have a provisional price before anyone travels out.
Composite driveway gates
Recent driveway gates from the fabricators on our network: an arched grey pair, a two-tone pair with a screen top, a pair with finials, and a pair with bars above composite boards.
Seen something close to what you want? Send photos of your opening for a provisional price.
Side gates and garden gates
A side gate with matching fence panels, a gate seen from inside the garden, an arched grey gate, and a side gate with a matching fixed panel.
Want a side gate to match your driveway gates? Mention it when you send your photos.
Guide prices
Side and garden gates
£900 to £1,500A single gate, fabricated and fitted. The boards, the lock and a fixed panel alongside decide where it falls.
Driveway gates
£1,800 to £5,000+Fabricated and fitted. The width, the exposure on the coast and the finish decide where it falls.
Width of the opening — the biggest single factor, and what decides between a single gate, a pair and a sliding gate.
Coastal weather — a galvanised frame and hardware for salt and wind off the Solway.
Yards behind terraces — single back gates made to out-of-square openings.
Open-plan fronts — a gate and matching fixed panel to close off a wide gap.
Guide prices only. Your provisional price is worked out from your photos and measurements.
Photos first, then a price
- 1
Send photos and a width
A few photos of the opening from the street and from inside, and its rough width.
- 2
Get a provisional price
A fabricator on our network looks at your photos and comes back with a provisional price and any questions.
- 3
Measured on site
If you are happy with the price, the fabricator visits to measure accurately and confirm the details.
- 4
Made and fitted
Your gate is made to those measurements on a steel frame and fitted by the same fabricator.
What Workington asks of a gate
Salt and wind on the west coast
Workington sits right on the coast where the Derwent meets the sea, and the wind comes straight in off the Solway. Salt air and spray reach a long way inland. Cheap hinges seize, bare steel rusts through paint, and a light gate gets thrown about. Here the frame is galvanised before it is powder coated, the hardware is chosen for the coast, and the posts are set deep.
Back gates for terraced yards
The older streets around the town centre, Northside and Harrington are terraces with yards behind and gates onto the back lane. Those openings are rarely square after a century of settling, and a stock gate never fits. Each gate is made to the measured opening, with a lock you can work from both sides and hinges that will not drop.
Wide gaps on the newer estates
Seaton, Stainburn and Salterbeck have newer homes with open-plan fronts and wide gaps between the house and the garage or boundary. Rather than one very wide gate, a gate and a matching fixed panel can close the gap neatly, made in the same boards and frame, so the opening you use every day stays a sensible size.
Boards and frame colours
Composite boards
Board ranges vary from one fabricator to another, but they can fit almost any make. If you have seen a board you like, send the name or a photo and the fabricator will tell you whether it can be used.
Steel frames
Frames can be powder coated in almost any RAL colour. Black and anthracite are the usual choices by the sea, but a frame can be matched to your windows or doors.
Areas around Workington
Send your postcode with your photos and we will confirm which fabricator can fit at your address.
Nearby towns
Also nearby: Seaton, Stainburn, Salterbeck, Harrington, Moorclose, Northside, Westfield, Great Clifton, Distington, Flimby, Camerton and Whitehaven.
The rest of the region is on our North West page.
What we make and fit
- Composite driveway gates Hinged pairs, single leaves and sliding gates, built ready for a motor if you want one.
- Composite garden gates Side gates, back gates and pedestrian gates to match your driveway gates.
- Metal gates Steel and metal-framed gates, made to measure.
- Composite fencing Matching fence panels fitted alongside a new gate.
FAQs about Composite Gates in Workington
How much do composite gates cost in Workington?
As a guide, a single side or garden gate is around £900 to £1,500 fabricated and fitted, and a pair of driveway gates runs from around £1,800 to £5,000 or more. The width, the exposure, the boards and the finish all move it. Send photos and a width for a provisional price for your opening.
Will a gate cope with salt and wind on the coast?
Yes, if it is specified for it. The frame is galvanised under the powder coat, the hardware is chosen for the coast, and the posts are set deep.
My yard opening is not square. Can you still fit a gate?
Yes. Each gate is made to the measured opening, so an out-of-square gap is not a problem.
Can you close off a wide gap beside the house?
Yes. A gate with a matching fixed panel alongside closes the gap, made in the same boards and frame.
Why do you ask for photos before visiting?
The fabricators on our network cover a wide area, so a visit can mean a long round trip. Photos and a rough width let them give you a provisional price first, and the visit to measure only happens once you are happy with it. You are not waiting in for someone only to find the price does not suit.
Do you cover Seaton, Harrington and Distington?
Send your postcode with your photos and we will confirm which fabricator can take on your job, whether you are in Workington, Seaton, Harrington, Distington or the villages around.
Ready for a price? Send a few photos and the width of your opening, and you will hear back with a provisional price.
Send your photos← Back to Composite Gates North West