Composite Gates Maryport
Composite driveway gates, garden gates and side gates for homes in Maryport, from the harbour and Netherton to Ewanrigg, Flimby, Dearham and Allonby, made to measure on a steel frame and fitted by a fabricator from our network.
Photos first, then a price. Send a few photos and the width of your opening, and you will have a provisional price before anyone travels out.
Composite driveway gates
Recent driveway gates from the fabricators on our network: a chocolate pair with a screen top, a pair with fleur-de-lis finials, an arched grey pair, and an unequal pair on a gravel drive.
Seen something close to what you want? Send photos of your opening for a provisional price.
Side gates and garden gates
A light oak side gate, a side gate with a screen top, an arched grey gate, and a side gate beside a timber fence.
Want a side gate to match your driveway gates? Mention it when you send your photos.
Guide prices
Side and garden gates
£900 to £1,500A single gate, fabricated and fitted. The boards, the lock and the frame colour decide where it falls.
Driveway gates
£1,800 to £5,000+Fabricated and fitted. The width, the slope and the finish decide where it falls.
Width of the opening — the biggest single factor, and what decides between a single gate, a pair and a sliding gate.
Harbour air — a zinc-coated frame and coated hardware for the Solway coast.
Steep streets — gates with raked bottoms for paths and drives on a slope.
Painted fronts — frames in almost any RAL colour to go with a painted terrace.
Guide prices only. Your provisional price is worked out from your photos and measurements.
Photos first, then a price
- 1
Send photos and a width
A few photos of the opening from the street and from inside, and its rough width.
- 2
Get a provisional price
A fabricator on our network looks at your photos and comes back with a provisional price and any questions.
- 3
Measured on site
If you are happy with the price, the fabricator visits to measure accurately and confirm the details.
- 4
Made and fitted
Your gate is made to those measurements on a steel frame and fitted by the same fabricator.
What Maryport asks of a gate
A harbour town on the Solway
Maryport was built as a port, and from Senhouse Street down to the marina the town looks out across the Solway towards Scotland. Gates near the water show it first: rust blooms at the welds, hinges stiffen, latches stop catching. Specifying a zinc-coated frame and marine-grade fittings at the start is cheap compared with replacing a gate after a few winters.
Streets that climb from the harbour
Away from the quays, Maryport is built up the brow above the River Ellen, and streets such as those around Fleming Square rise sharply. Front paths often run uphill to the door. The fabricator can cut the bottom rail on an angle so the gate matches the path, and choose the hinge side so the leaf swings downhill and clear.
Painted terraces and colour
The terraces around the harbour and the town centre are painted in all sorts of colours, and a gate can pick up on that rather than defaulting to black. Frames can be powder coated in almost any RAL colour, and the boards come in greys, browns and wood effects, so a gate can match a front door or sit quietly against a painted front.
Boards and frame colours
Composite boards
Board ranges vary from one fabricator to another, but they can fit almost any make. If you have seen a board you like, send the name or a photo and the fabricator will tell you whether it can be used.
Steel frames
Frames can be powder coated in almost any RAL colour, so the gate can pick up a painted front, a front door or the window frames.
Areas around Maryport
Send your postcode with your photos and we will confirm which fabricator can fit at your address.
Nearby towns
Also nearby: the harbour, Netherton, Ewanrigg, Glasson, Flimby, Dearham, Crosby, Allonby, Broughton Moor and Great Broughton.
The rest of the region is on our North West page.
What we make and fit
- Composite driveway gates Hinged pairs, single leaves and sliding gates, built ready for a motor if you want one.
- Composite garden gates Side gates, back gates and pedestrian gates to match your driveway gates.
- Metal gates Steel and metal-framed gates, made to measure.
- Composite fencing Matching fence panels fitted alongside a new gate.
FAQs about Composite Gates in Maryport
How much do composite gates cost in Maryport?
As a guide, a single side or garden gate is around £900 to £1,500 fabricated and fitted, and a pair of driveway gates runs from around £1,800 to £5,000 or more. Size, the angle of the ground, the board colour and the fittings all move it. Send photos and a width for a provisional price for your opening.
We live near the marina. What should we ask for?
A zinc-coated frame under the powder coat and marine-grade hinges and latch. The fabricator will specify them for coastal homes.
Our front path runs uphill. Can a gate be made for that?
Yes. The bottom rail can be cut on an angle to match, with the gate hinged so it swings downhill.
Can the frame be a colour other than black?
Yes. Frames can be powder coated in almost any RAL colour. Send a photo of the house with your gate photos.
Why do you ask for photos before visiting?
The fabricators on our network cover a wide area, so a visit can mean a long round trip. Photos and a rough width let them give you a provisional price first, and the visit to measure only happens once you are happy with it. You are not waiting in for someone only to find the price does not suit.
Do you cover Dearham, Flimby and Allonby?
Send your postcode with your photos and we will confirm which fabricator can take on your job, whether you are in Maryport, Dearham, Flimby, Allonby or the villages around.
Ready for a price? Send a few photos and the width of your opening, and you will hear back with a provisional price.
Send your photos← Back to Composite Gates North West